Description

Product Details:

The VoSwitch offers a simple solution to your accessory wiring needs.  A fuse box, relay box, and switch panel all in one.  This system allows you to install it and forget it.  Simply attach the box to your battery and run a single cable to your interior dash control and bam, its ready to go…. Now when you need to add light bars, rock lights, lockers, or power to any accessory, it’s as simple as hooking it up to any circuit on the relay box and your switch panel now controls that item.  No need for running wires everywhere and having relays and fuses scattered all over your engine bay.

The VoSwitch comes with 4 great options for your Jeep Wrangler JL, JLU or Gladiator JT depending on your needs, or a Universal model is available for any Jeep, Truck, UTV, or SxS.  Of course if you are feeling DIY you can use any of these options in any vehicle with slight modifications… Meaning the 3 JL and JK options will work in any vehicle but are designed specifically to bolt into a Jeep Wrangler JL , JK, or Jeep Gladiator JT with basic hand tools.

JL120:

• Compatible with Jeep JL, JLU and Gladiator, factory look, OE style
• Switch control system is fully programmable.  12 switches can be set as on/off, flash, strobe, combo of flash with strobe combo, or momentary.
• Switch panel has 4 backlight colors to allow you 4 options to select for matching your dash light, red ,blue, green, white. Light turns orange when on and dimmable.
• Easy to install, no trim no drilling, plug and play.
• Waterproof power module and connector
• The universal relays and fuses are replaceable ( not solid state ) maintain the system with low expense.

JL300:  

• Compatible witch Jeep JL, JLU and Gladiator factory look, OE style
• Switch control system is fully programmable, 8 switches can be set as on/off, flash, or strobe, combo of flash with strobe combo, or momentary.
• Easy to install, no trim, no drilling, plug and play.
• Waterproof power module.
• The regular relays and fuses are replaceable ( not solid state ), maintain the system with low expense.

JL400:

• Compatible with Jeep JL, JLU and Gladiator, factory look, OE style
• Switch control system is fully programmable.  4 switches can be set as on/off, flash, strobe, combo of flash with strobe combo, or momentary.
• Switch panel has 4 backlight colors to allow you 4 options to select for matching your dash light, red, blue, green, white.  Light turns orange when on and dimmable.
• Easy to install, no trim, no drilling, plug and play.
• Waterproof power module and connector.
• The universal relays and fuses are replaceable( not solid state ).  Maintain the system with low expense.

JL410

• Factory look, OE style.  Works with Jeep Wrangler 2024 and Gladiator 2024.  Does NOT work with 2018-2023 Jeep Wrangler and Gladiator.  Does NOT work with 392.
• Switch panel backlight brightness is dimmable.
• Easy to install, no trim, no drilling, plug and play.
• Waterproof power module.
• The regular relays and fuses are replaceable( not solid state ).  Maintain the system with low expense.

JL500

• Factory look, OE style. Uses the unused space in the factory headlamp bezel for a clean 5-switch control panel.
• Works with Jeep Wrangler JL 2018-present and Jeep Gladiator JT 2020-present.
• Does NOT fit Wrangler 4xe or 392 models.
• Designed for vehicles with the factory decorative plug next to the headlight switch. Vehicles without this plug may require a Mopar bezel.
• Easy to install, no cutting, no drilling, and no permanent dash modifications.
• Plug and play setup with pre-terminated wiring.
• Supports up to 100 amps of total output for LED light bars, pod lights, air compressors, lockers, and other accessories.
• Waterproof power module.
• Replaceable relays and fuses. Not solid state, so repairs can be made with standard automotive parts.
• Low Voltage Disconnect helps protect the battery from being drained.
• Sleep Mode keeps power consumption low when the vehicle is parked.
• Switch panel backlight brightness is dimmable from 100% down to 10%.
• Memory dimming function remembers your preferred backlight brightness.
• Solid and flash/strobe modes allow control of auxiliary lighting for recovery, chase truck lighting, and emergency visibility

JL800:

• Compatible witch Jeep JL JLU and Gladiator factory look, OE style
• Switch control system is fully programmable, 8 dimmable switches can be set as on/off, flash, strobe, or momentary.
• Each switch can be set as the Master switch to link over several switches, which means you can tap one switch to turn on/off multiple functions.
• Any 2 switches can be set as High/Low combo, the light with H/L can hook to H/L switch combo.

JL810

• Factory look, OE style.  Easy to install, no trim no drilling.  Works with Jeep Wrangeler 2024 and Gladiator 2024. Does NOT work with 2018-2023 Jeep Wrangler and Gladiator. Does NOT work with 392.
• Keypad backlight can be set to red, blue, green or white.  Backlight brightness is dimmable.
• There are 6 different features for each button. 1.ON/OFF 2.Momentary 3.Flash 4.Quick Flash 5. Flash & Strobe Combo 6. Strobe . Any two of 12 switches can be set high/low combo.  Any one of 12 switch can be set to a master switch to link other switches.
• Waterproof power module.
• The regular relays and fuses are replaceable( not solid state ).  Maintain the system with low expense.